
3 Head lighting kit
With your mainlight source angled roughly 45ยบ to your subject there will be dark shadows on one side of their face. The reflector will throw some of the light back onto the subject and therefore providing balanced illumination on the subject. You could increase the effect by using a silver (foil) coated reflector instead of a white one.
Your strobe should be set on a reasonable power to ensure there is enough light to reflect back onto the subject. If you were to use a larger softbox this power would need to
be increased.
You then have another flash head. You position it in the same position as the reflector we used previously. Giving a similar result but with more evenly distributed and diffused light. We still want to keep some definition in the models face, so we use a main light and a fill light. If light one is our main source then light two should be set on approximately two f stops less.
Adding a third light gives you a lot more creative control. You can use it as a fill light, catch light, spot light or a backlight. Keeping the other two strobes in the same position and settings as before we aim the third strobe against the background directly behind the model. We don’t need a softbox on this flash head but we could use an aluminium reflector if a more intense lighting effect was desired.





